FORM-2A


                   (Sce MahaRERA order No.           Of2018)
                                                        ASSURANCE
            ENGINEER'S CERTIFICATE FOR QUALITY




 To.
The SARA PROPERTIES, SARA PARIVARTAN SECTOR-B, PHASE-2,

Gut No.234/2(P), sAWANGI, Taluka & Dist Aurangabad,




                        Quality Assurance Certificate



        (Certificate No. FORM-2A for the quarter July-2021)


                                                                     Construction
Subject -   Certificate for quality of materials used and quality of
                                                                           of the
and workmanship      for the Work of 3 No. off buildings(s)/ 3 Wings(s)
SARA PROPERTIES of the project situated Gut No.234/2(P), SAWANGI ,Taluka
                                                           and longitude of the
& Dist Aurangabad, demarcated by its boundaries (latitude
                                                          OTHER PROPERTY
end points) 9 MTR WIDE INTERNAL ROAD to the North,
to the South, OTHER PROPERY to the East, 12
                                                MTR WIDE INTERNAL ROAD

to the West, of Division Sawangi, village Sawangi,
                                                   taluka Aurangabad, District

Aurangabad,   Pin-431007, admeasuring 3135 Sq. Mtrs. a r e a being developed
by SARA PROPERTIES.




Reference: MahaRERA Registration Number - P51500016122.
Sir,
I MR. TANAJI PATIL have undertaken an assignment of supervision of this
real estate project.



1. Our Responsibility:-

            To Carry out the work in accordance with the development
permission and as per the approved plan and submit certificate of supervision
of work and to carry out material testing in-situ or in the authorized laboratory
and    to   ensure     quality work and workmanship as per prescribed
                                  of
specification, and as per NBC and or other relevant code of practice.

1. Material Testing

          I/We have applied following mandatory checks on the basic
materials, used in the constructions.
i. Cement:

            It   has   been      tested for its fineness,   soundness, setting time,
compresive strength etc. as per IS code 3535:1986 or as per other relevant
IS/BS/NBC code or as per industry standards and its results are within the
permissible limits.

ii. Coarse aggregate:

         It has been tested, for deleterious materials, clay lumps, crushing
value, impact value as per IS 2430:1986 or as per other relevant IS/BSNBC
code or as per industry standards and its results are within the permissible
limits.

iii. Bricks/blocks:
          They have been tested for water absorption, crushing strengths etc. as
 per IS 5454:1978 or as per other relevant IS/BS/NBC code or as pr industry
 standards and its results are within permissible limits.

 iv. Concrete/Ready-mix Concrete
          It has been tested for compressive strength for various periods as per
 IS 456:2000 and IS 1199 or as per other relevant IS/BS/NBC codes, as per
 industry standards and its results are within permissible limits.
v. Steel for concrete:

         It has been tested as per 1S 2062:2011 or as per other relevant
IS/BS/NBC code or as per industry standards for tensile strength, elongation
and gauge length etc. and its results are within permissible limits.

vi. Testing of Other materials:

              Other materials like sand, crushed sand, floor tiles, fixtures, and
fittings, pipes and sanitary fittings etc. (List out all items ) used in this project
conform to relevant Is/BS/NBC code or as per standards laid down by the
industry for a particular material.

2. Workmanship:

            1/we hereby certify that work has been carried out under our
supervision. We further certify that workmanship and quality is satisfactory
and up to the mark and the work has been acceptable within the permissible
limits off deviations as per relevant code of practice.

3. Electrical Materials and
                              workmanship:
      Works of all the electrical wiring/ connections /lit installation/ other
electrical installations have been carried out under authorized /registered
electrical engineer and its records has been maintained. The materials used
conform to the relevant I.S/B.S/ National Building codes or as per industry
standards.

4. Structural engineer:

                Promoters has engaged structural engineer Mr. N G
KARKHANE having Licenses No. AMC-59/89 having office No.-0240-2452305
cell No. 9823028081

                The structural design of buildings in this project has been
done under his supervision. He has checked the soil report before laying PCC
for foundation in consolation with soil consultant. The formwork and concrete
mix design has been done as per IS 10262:2009 or as per other relevant codes
as applicable. His periodic checks and certificates for STABILITY and SAFETY
have been kept on record
5. Preservation of
                        records:
               Record of all test results of this project have been properly kept
in the prescribed formats and will be preserved at least up to the defect liability
period or for the period as required by any other provision off law.

6.   Please   specify   materials   or   any   other   item   off works   which   were   not

conforming to the standard specifications and which were not rejected

     1:- Coloring,

     2:- Aluminum,

     3:- Doors & It's Fitting,

     4:- Tiles,

     5:-CP & sanitary.




Yours Faithfully,



Signature of Engineer

Name: - Tanaji Patil


Phone No: 9545454106


Place: Aurangabad.