FORM-2A

                    (Sce MahaRERA order No.        Of2018)
             ENGINEER'S CERTIFICATE FOR QUALITY ASSURANCE




 he SARA PROPERTIES, SARA PARIVARTAN SECTOR-B, PHASE-1,

Gut No.234/2(P), SAWANGI, Taluka & Dist Aurangabad,



                        Quality Assurance Certificate


         (Certificate No. FORM -2A for the quarter July-2021)


                                                              of Construction
Subject Certificate for quality of materials used and quality
                                                                   of the
and workmanship for the Work of 3 No. off buildings(s)/ 3 Wings(s)
SARA PROPERTIES of the project situated Gut No.234/2(P), SAWANGI , Taluka
Dist Aurangabad, demarcated by its boundaries (latitude and longitude of the
end points) SECTOR C - OF SAME GROUP HOUSING SCHEME to the North,
INTRENAL ROAD to the South, Land form Gut No. 261 to the East,
INTERNAL ROAD to the West, of Division Sawangi, village Sawangi, taluka
Aurangabad, District Aurangabad, Pin-431007, admeasuring 6877.14 Sq.
Mtrs. area being developed by SARA PROPERTIES.




Reference:   - MahaRERA Registration Number - P51500001468.
Sir,
I MR. TANAJI PATIL have            undertaken an assignment of supervision of this
 real estate project.




 1. Our Responsibility:

            To Carry out the work in accordance with the development
permission and as per the approved plan and submit certificate of supervision
of     and to carry out material testing in-situ or in the authorized laboratory
and
   workt0 ensure
                        quality   of    work    and    workmanship   as   per   prescribed
specification, and as per NBC and or other relevant code of practice.
1. Material Testing:

           I/We have applied following mandatory checks on the basic
materials, used in the constructions.
i. Cement:-

           it   has     been   tested    for   its   fineness, soundness, setting time,
compressive strength etc. as per IS code 3535: 1986 or as per other relevant
IS/BS/NBC code or as per industry standards and its results are within the
permissible limits.

ii. Coarse aggregate:

          it has been      tested, for deleterious materials, clay lumps, crushing
value, impact value as per IS 2430:1986 or as per other relevant IS/BSNB3c
code or as per industry standards and its results are within the permissible
limits.

iii. Bricks/blocks:
         They have been tested for water absorption, crushing strengths etc. as
per IS 5454:1978 or as per other relevant IS/BS/NBC code or as pr industry
standards and its results are within permissible limits.

iv. Concrete/Ready-mix Concrete

         It has been tested for compressive strength for various periods as per
IS 456:2000 and IS 1199 or as per other relevant 1S/BS/NBC codes, as per
industry standards and its results are within permissible limits.
v.   Steel for concrete:

            It has been tested as per IS 2062:2011 or as per other relevant
IS/BS/NBC code or as per industry standards for tensile strength, elongation
and gauge length etc. and its results are within permissible limits.

vi. Testing of Other materials:

              Other materials like sand, crushed sand, floor tiles, fixtures, and
fittings, pipes and sanitary fittings etc. (List out all items) used in this project
conform to relevant Is/BS/NBC code or as per standards laid down by the
industry for a particular material.

2. Workmanship:
              1/we hereby certify that work has been carried out under our
supervision. We further certify that workmanship and quality is satisfactory
and up to the mark and the work has been acceptable within the permissible
limits off deviations as per relevant code of practice.

3. Electrical Materials and workmanship:

                   works of all the electrical wiring / connections /lit
installation/ other electrical installations have been carried out under
authorized /registered electrical engineer and its records has been maintained.
The materials used conform to the relevant I.S/B.S/ National Building codes or
as per industry standards.

4. Structural engineer:
                Promoters has engaged structural engineer Mr. NG
KARKHANE having Licenses No.-AMC-59/89 having office No.-0240-2452305
cell No. 9823028081

                The structural design of buildings in this project has been
done under his supervision. He has checked the soil report before laying PCC
for foundation in consolation with soil consultant. The formwork and concrete
mix desigrn has been done as per IS 10262:2009 or as per other relevant codes
as applicable. His periodic checks and certificates for STABILITY and SAFETY
have been kept on record.
5. Preservation of
                      records:
                Record of all test results of this project have been properly kept
inthe prescribed formats and will be
                                        preserved at least up to the defect liability
period or for the period as required by any other provision off law.

6.   Please specify    materials or any other item off works which were not
conforming to the standard specifications and which were not rejected.

     1:-Coloring,
     2:- Aluminum,

     3:- Doors & It's Fitting,

     4:- Tiles,

     5:-CP 8& sanitary.




Yours Faithfully,



Signature of Engineer

Name: Tanaji Patil

Phone No:         9545454106

Place: Aurangabad,